Rubbermaid Product specifications are available for download in many different formats. Each format contains specifications for multiple product types with the assumption that you delete any products that you do not wish to specify.

SECTION 10 57 13 - Hat and Coat Racks

WARDROBE AND CLOSET SPECIALTIES

** NOTE TO SPECIFIER ** Rubbermaid Home Products; wardrobe and closet shelving systems. . This section is based on the products of Rubbermaid Home Products, which is located at:

8900 North Pointe Executive Dr.

Huntersville, NC 28078

Toll Free Tel: 888-895-2110

Tel: 573-204-2193

Fax: 704-987-4388

Email: request info (jessica.knipe@newellco.com)

Web: www.rubbermaidpro.com

Rubbermaid is committed to taking responsibility for protecting our community and promoting environmental stewardship. Our voluntary participation in sustainability programs shows our commitment to helping out customers build and keep healthy homes. With over 20 years of experience providing wire ventilated shelving to builders and consumers, we pride ourselves in offering storage and organization products that help keep homes healthy and safe. Our wire shelving products are made from 100 percent recycled steel; 100 percent recyclable with construction waste; Certified by GREENGUARD for low VOC content. Our laminate wood system: Uses a high percentage of recycled content; Is affiliated with top notch environmental associations; Is CARB certified to phase 1 standard CCR93120.2a for reduced formaldehyde content. Rubbermaid's skilled operational personnel are charged with finding environmental solutions to every day business. We regularly report tons of waste saved from landfills, millions of gallons of recycled water and thousands of pounds of reused corrugate and resin. We continue to invest in green technology and build relationships with our community, suppliers, customers and stakeholders to improve the overall health of people and conservation of natural resources.

PART 1 GENERAL

1.1 SECTION INCLUDES

class="specifier-note">** NOTE TO SPECIFIER ** Delete items below not required for project.

  • A. Epoxy-coated ventilated shelving.
  • B. Adjustable laminated wood closet system.
  • C. Laminated wood closet systems.
  • D. Garage storage systems.

1.2 RELATED SECTIONS

** NOTE TO SPECIFIER ** Delete any sections below not relevant to this project; add others as required.
  • A. Section 03 30 00 - Cast-in-Place Concrete.
  • B. Section 04 22 23.29 - Split-Face Concrete Unit Masonry.
  • C. Section 06 11 16 - Mechanically Graded Lumber.
  • D. Section 06 20 00 - Finish Carpentry.
  • E. Section 09 21 16.23 - Gypsum Board Shaft Wall Assemblies.

1.3 REFERENCES

  • A. GREENGUARD Environmental Institute.
  • B. California Air Resources Board (CARB).
  • C. Federal Trade Commission (FTC) Regulations.

1.4 SUBMITTALS

  • A. Submit under provisions of Section 01 30 00 - Administrative Requirements.
  • B. Product Data: Manufacturer's data sheets on each product to be used, including: 1. Preparation instructions and recommendations. 2. Storage and handling requirements and recommendations. 3. Installation methods.
  • C. Shop Drawings: Elevations, sections and details indicating product by description and product item part number. Materials schedule for each location of installation.
  • ** NOTE TO SPECIFIER ** Delete selection samples if colors have already been selected.
  • D. Selection Samples: For each finish product specified, two complete sets of color chips representing manufacturer's full range of available colors and patterns.
  • E. Verification Samples: For each finish product specified, two samples, minimum size 12 inches (305 mm) long, representing actual product, color, and patterns.

1.5 QUALITY ASSURANCE

  • A. Manufacturer Qualifications: Minimum 10 years manufacturing storage and shelving systems.
  • B. Installer Qualifications: Factory trained and product experienced.
  • ** NOTE TO SPECIFIER ** Include a mock-up if the project size and/or quality warrant taking such a precaution. The following is one example of how a mock-up on a large project might be specified. When deciding on the extent of the mock-up, consider all the major different types of work on the project.
  • C. Mock-Up: Provide a mock-up for evaluation of surface preparation techniques and application workmanship.
    • 1. Finish areas designated by Architect.
    • 2. Do not proceed with remaining work until workmanship, color, and sheen are approved by Architect.
    • 3. Refinish mock-up area as required to produce acceptable work.
  • D. Sourcing: Provide all storage shelving from a single manufacturer.

1.6 DELIVERY, STORAGE, AND HANDLING

  • A. Store products in manufacturer's unopened packaging until ready for installation.
  • B. Comply with instructions and recommendations of manufacturer for special delivery, storage, and handling requirements.
  • C. Store shelving in a manner to avoid significant or permanent damage of shelves.

1.7 PROJECT CONDITIONS

  • A. Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's absolute limits.
  • B. Coordinate layout and installation of storage shelving with other construction to which it is attached including floor, partitions and wall assemblies.

1.8 ENVIRONMENTAL REQUIREMENTS

  • A. GREENGUARD Certified (indoor air quality) - Product shall limit emissions of volatile organic compounds (VOC) or formaldehyde, requires no sealants or paint during installation, promotes air circulation, preventing mold and dust accumulation.
  • B. Recyclable Material - Verified by FTC Regulations: Product shall be made from 100 percent recycled steel and is 100 percent recyclable with construction waste.

1.9 WARRANTY

** NOTE TO SPECIFIER ** Refer to manufacturer's literature for warranty information.

  • A. Manufacturer shall provide limited lifetime warranty.

PART 2 PRODUCTS

2.1 MANUFACTURERS

  • A. Acceptable Manufacturer: Rubbermaid Home Products, which is located at: 8900 North Pointe Executive Dr. ; Huntersville, NC 28078; Toll Free Tel: 888-895-2110; Tel: 573-204-2193; Fax: 704-987-4388; Email: request info (lee.watson@rubbermaid.com); Web: www.rubbermaidpro.com
  • ** NOTE TO SPECIFIER ** Delete one of the following two paragraphs; coordinate with requirements of Division 1 section on product options and substitutions.
  • B. Substitutions: Not permitted.
  • C. Requests for substitutions will be considered in accordance with provisions of Section 01 60 00 - Product Requirements.
  • ** NOTE TO SPECIFIER ** The Ventilated Wire Shelving System is a customizable solution for the storage needs of today from America's most trusted name in home organization, Rubbermaid. For shelving load capacity consult manufacturer's literature. Delete if not required.

2.2 VENTILATED WIRE STORAGE SYSTEM

  • A. Product: Ventilated Wire Shelving System as manufactured by Rubbermaid Home Products.
  • B. Compliance:
    • 1. GREENGUARD Certified for low VOC content.
    • 2. Verified by FTC Regulations:
      • a. Recycled Steel: Shelving is made from 100 percent recycled steel.
      • b. Recyclability: Shelving is 100 percent recyclable with construction waste.
  • C. Shelving:
    • 1. Material: Ventilated wire storage shelving shall be constructed of Grade C-1008 bright, basic, cold-drawn steel wire with average tensile strength of 100,000 psi (690,000 kPa).
    • 2. Fabrication: Fabricate ventilated wire storage shelving square, rigid, flat, and free of dents or distortion. Fabricate connections to form a rigid structure, free of buckling and warping. Steel wire shall be resistance welded at intersections of cross deck wires spaced at 1 inch (25 mm) increments, unless 1/2 inch (13 mm) increment is specified, and trimmed smooth.
    • 3. Finish: Steel components shall be covered with an iron phosphate coating to ensure a proper bond with the finish coat. The finish coat shall be an epoxy-polyester hybrid powder coating applied at 3 mil to 5 mil (0.08 mm to 0.13 mm) thickness providing a hard, smooth and durable finish.
    • ** NOTE TO SPECIFIER ** Delete color not required.
      • Color: White.
      • Color: Satin Nickel.
      • Color: Gray.
      • ** NOTE TO SPECIFIER ** Delete shelf types not required.
    • 4. Shelf Type: Shelf and Rod.
    • ** NOTE TO SPECIFIER ** Delete size options not required.
      • a. Depth: 12 inches (305 mm).
      • b. Depth: 16 inches (406 mm).
      • c. Depth: As indicated on Drawings.
      • d. Depth: As selected by Architect.
    • 5. Shelf Type: Free Slide.
    • ** NOTE TO SPECIFIER ** Delete size options not required.
      • a. Depth: 12 inches (305 mm).
      • b. Depth: 16 inches (406 mm).
      • c. Depth: As indicated on Drawings.
      • d. Depth: As selected by Architect.
    • 6. Shelf Type: Linen.
    • ** NOTE TO SPECIFIER ** Delete size options not required.
      • a. Depth: 9 inches (229 mm).
      • b. Depth: 12 inches (305 mm).
      • c. Depth: 16 inches (406 mm).
      • d. Depth: 20 inches (508 mm).
      • e. Depth: As indicated on Drawings.
      • f. Depth: As selected by Architect.
    • 7. Shelf Type: TightMesh, steel wire spacing shall be on 1/2 inch (13 mm) increments.
    • ** NOTE TO SPECIFIER ** Delete size options not required.
      • a. Depth: 9 inches (229 mm).
      • b. Depth: 12 inches (305 mm).
      • c. Depth: 16 inches (406 mm).
      • d. Depth: 20 inches (508 mm).
      • e. Depth: As indicated on Drawings.
      • f. Depth: As selected by Architect.
    • 8. Shelf Type, Depth: As indicated on Drawings.
    • 9. Shelf Type, Depth: As selected by Architect.
  • D. Manufacturer's Recommended Mounting Heights:
    • ** NOTE TO SPECIFIER ** Delete option for mounting heights not required.
    • 1. Mounting Heights:
      • a. Top Shelf of Double Hang: 84 inches (2134 mm).
      • b. Single Shelf Height: 68 inches (1727 mm).
      • c. Lower Shelf of Double Hang: 42 inches (1067 mm)
      • d. Shoe Shelf Support: 12 inches (305 mm).
    • 2. Mounting Heights: As indicated on Drawings.
    • 3. Mounting Heights: As selected by Architect.
    • 4. Hardware Requirements: Provide mounting hardware to achieve designed loading capability. Mounting System:
    • ** NOTE TO SPECIFIER ** Delete option for mounting configuration not required.
    • 5. Mounting Configuration: Wall to Wall.
    • 6. Mounting Configuration: Open End to Wall.
    • 7. Mounting Configuration: Open End to Open End.
    • 8. Mounting Configuration: Shoe Shelf.
    • 9. Mounting Configuration: As indicated on Drawings.
    • 10. Mounting Configuration: As selected by Architect.
    • 11. Mounting hardware components shall provide shelving installation to drywall partitions and walls without requiring mounting to concealed structural members.
    • ** NOTE TO SPECIFIER ** Delete if not required.
    • 12. Fixed Mounting System: Provide manufacturer's Fast Set pre-loaded installation system to secure shelving systems to adjacent walls.
      • a. Fast Set Components:
        • 1) 1/2 inch (13 mm) and 5/8 inch (16 mm) back clips.
        • 2) 1/2 inch (13 mm) and 5/8 inch (16 mm) flapless back clips.
        • 3) Wall bracket and FreeSlide wall bracket.
        • 4) Shoe shelf support.
        • 5) Wall anchor.
      • b. Auxiliary Hardware: Provide sized matched Fast Set support braces, wall brackets, back clips, clamps, anchors, joiner plates, pole support assembly and finish end caps for a complete installation of the shelving system. Including but not limited to the following components:
        • 1) End Caps: Small, large and TightMesh end caps.
        • 2) Metal Corner Bracket: Phillips screws.
        • 3) Anchors: 1/4 inch (6 mm) anchors.
        • 4) Rod spacer clips.
        • 5) FreeSlide and wardrobe rod spacer cap.
        • 6) FreeSlide joiner plate and rod spanner.
        • 7) All-purpose clamps.
        • 8) Wall bracket and FreeSlide wall bracket.
        • 9) Angle wall bracket.
        • 10) Anchored back clips, pin loaded or non-loaded.
        • 11) Anchor-less back clips.
        • 12) Shoe shelf support.
      • c. Pole System Components:
        • 1) 68 inches (1727 mm), 84 inches (2134 mm), and 97 inches (2464 mm) poles.
        • 2) Square pole cap.
        • 3) #8 self-tapping screw.
        • 4) Pole clamp.
    • 13. Adjustable Mounting System: Provide manufacturer's FastTrack reconfigurable mounting system.
      • a. FastTrack Components:
        • 1) Horizontal rail, 40 inches (1016 mm) or 80 inches (2032 mm).
        • 2) Wall anchor.
      • b. Support brackets are required for 30 inches (914 mm) span. Available in 12 inches (305 mm), 16 inches (406 mm), 20 inches (508 mm) depths.
      • ** NOTE TO SPECIFIER ** Delete options for heights not required.
      • c. Height of Uprights/Tracks: 13.75 inches (349 mm).
      • d. Height of Uprights/Tracks: 25 inches (635 mm).
      • e. Height of Uprights/Tracks: 47.5 inches (1207 mm).
      • f. Height of Uprights/Tracks: 70 inches (1778 mm).
      • g. Height of Uprights/Tracks: 81.25 inches (2064 mm).
      • h. Height of Uprights/Tracks: As indicated on Drawings.
      • ** NOTE TO SPECIFIER ** The Heirloom Select collection is a combination of the Laminated Wood System components with the Adjustable Mounting System of the Ventilated Wire Storage System. The product combines a cabinet look with the adjustable track system. The Heirloom Select Collection is a line of custom wood storage solutions from America's most trusted name in home organization, Rubbermaid. Delete if not required.

2.3 ADJUSTABLE LAMINATED WOOD SYSTEM

  • A. Product: The Heirloom Select as manufactured by Rubbermaid Home Products.
  • B. Compliance: Phase 2 CARB certified for reduced formaldehyde content.
  • C. Components:
    • 1. Panel: 3/4 inch (19 mm) thick furniture grade particleboard with a density of 45 pounds per cubic foot (721 kg/cu. m), covered with thermo-fused melamine.
    • 2. Fabrication: Composite panel product composed of resin and wood fibers of varying percents (dependent on properties and thickness) pressed into panels of various sizes.
    • 3. Finish: All visible edges shall be covered with 1 mm (.039 inch) PVC edge banding.
    • ** NOTE TO SPECIFIER ** Delete color not required.
      • a. Color: White.
      • b. Color: Bisque (Ivory).
      • c. Color: Norway Maple.
      • d. Color: Wild Apple (Cherry).
      • e. Color: Chocolate Pear (Mahogany).
    • 4. Cabinet Sizes:
      • a. Width: 24 inches (610 mm).
      • b. Depth: 14 inches (356 mm).
      • ** NOTE TO SPECIFIER ** Delete cabinet height not required.
      • c. Height: 10 inches (457 mm).
      • d. Height: 20 inches (762 mm).
      • e. Height: 30 inches (1219 mm).
    • 5. Shelf Sizes:
      • a. Depth: 14 inches (356 mm).
      • ** NOTE TO SPECIFIER ** Delete widths not required.
      • b. Width: 24 inches (610 mm).
      • c. Width: 96 inches (2438 mm).
    • 6. Hang Rod: Round.
    • ** NOTE TO SPECIFIER ** Delete rod finish not required.
      • a. Rod Finish: Satin nickel.
  • D. Adjustable Mounting System:
    • 1. Hardware Requirements: Provide mounting hardware to achieve designed loading capability.
    • 2. Mounting hardware components shall provide shelving installation to drywall partitions and walls without requiring mounting to concealed structural members.
    • ** NOTE TO SPECIFIER ** Delete mounting system not required.
    • 3. Mounting System: Provide manufacturer's FastTrack reconfigurable mounting system.
      • a. FastTrack Components:
        • 1) Horizontal rail, 40 inches (1016 mm) or 80 inches (2032 mm).
        • 2) Wall anchor.
    • 4. Mounting System: As indicated on Drawings.
    • 5. Mounting System: As selected by Architect.
    • ** NOTE TO SPECIFIER ** Delete mounting configuration not required.
    • 6. Mounting Configuration: Wall to Wall.
    • 7. Mounting Configuration: Open End to Wall.
    • 8. Mounting Configuration: Open End to Open End.
    • 9. Mounting Configuration: Shoe Shelf.
    • 10. Mounting Configuration: As indicated on Drawings.
    • 11. Mounting Configuration: As selected by Architect.
    • ** NOTE TO SPECIFIER ** Delete options for heights not required.
    • 12. Height of Uprights/Tracks: 13.75 inches (349 mm).
    • 13. Height of Uprights/Tracks: 25 inches (635 mm).
    • 14. Height of Uprights/Tracks: 47.5 inches (1207 mm).
    • 15. Height of Uprights/Tracks: 70 inches (1778 mm).
    • 16. Height of Uprights/Tracks: 81.25 inches (2064 mm).
    • 17. Height of Uprights/Tracks: As indicated on Drawings.
    • 18. Uprights no more than 30 inches apart.
  • E. Mounting Hardware: Provide mounting rail, mounting fasteners, shelf hardware, full extension drawer glides, hanging rod assembly for a complete installation of the shelving system.
  • F. Accessories: Provide accessories as scheduled on Drawings including but not limited to the following.
  • ** NOTE TO SPECIFIER ** Delete accessories not required.
    • 1. Drawers, satin nickel finish.
    • 2. Doors, satin nickel finish.
    • 3. Tie and belt racks, satin nickel finish.
    • 4. Shoe shelves, satin nickel finish.
    • 5. Show cubbies, satin nickel finish.
    • 6. Valet rod, satin nickel finish.
    • 7. Jewelry drawers.
    • ** NOTE TO SPECIFIER ** The Heirloom Collection is a line of custom wood storage solutions from America's most trusted name in home organization, Rubbermaid. Delete if not required.

2.4 LAMINATED WOOD SYSTEM

  • A. Product: The Heirloom Collection as manufactured by Rubbermaid Home Products.
  • B. Compliance: Phase 2 CARB certified for reduced formaldehyde content.
  • C. Components:
    • 1. Panel: 3/4 inch (19 mm) thick furniture grade particleboard with a density of 45 pounds per cubic foot (721 kg/cu. m), covered with thermo-fused melamine.
    • 2. Fabrication: Composite panel product composed of resin and wood fibers of varying percents (dependent on properties and thickness) pressed into panels of various sizes.
    • 3. Finish: All visible edges are covered with 1 mm (.039 inch) PVC edge banding.
    • ** NOTE TO SPECIFIER ** Delete color not required.
      • a. Color: White.
      • b. Color: Bisque (Ivory).
      • c. Color: Norway Maple.
      • d. Color: Wild Apple (Cherry).
      • e. Color: Chocolate Pear (Mahogany).
      • f. Color: Matte Gray.
    • 4. Partition Sizes:
      • a. Height: 18 inches (457 mm).
      • ** NOTE TO SPECIFIER ** Delete partition heights not required.
      • b. Height: 30 inches (762 mm).
      • c. Height: 48 inches (1219 mm).
      • d. Height: 72 inches (1829 mm).
      • e. Height: 84 inches (2134 mm.
      • f. Height: 96 inches (2438 mm).
      • ** NOTE TO SPECIFIER ** Delete partition depth not required.
      • g. Depth: 14 inches (356 mm).
      • h. Depth: 19 inches (483 mm).
    • 5. Shelf Sizes:
    • ** NOTE TO SPECIFIER ** Delete widths not required.
      • a. Width: 18 inches (457 mm).
      • b. Width: 24 inches (610 mm).
      • c. Width: 30 inches (762 mm).
      • d. Width: 36 inches (914 mm).
      • ** NOTE TO SPECIFIER ** Delete depths not required.
      • e. Depth: 14 inches (356 mm).
      • f. Depth: 19 inches (483 mm).
      • ** NOTE TO SPECIFIER ** Delete rod not required.
    • 6. Hang Rod:
      • a. Type: Round - satin nickel.
      • b. Type: Round - antique bronze.
      • c. Type: Oval - satin nickel.
  • D. Hardware Requirements: Provide mounting hardware to achieve designed loading capability.
    • 1. Mounting Hardware:
      • a. Components shall provide installation to walls with concealed structural members.
      • ** NOTE TO SPECIFIER ** Delete mounting option not required.
      • b. Mounting: Floor mount.
      • c. Mounting: Wall mount.
    • 2. Material: All steel European hardware system.
  • E. Mounting Hardware: Provide mounting rail, mounting fasteners, shelf hardware, full extension drawer glides, hanging rod assembly for a complete installation of the shelving system.
  • F. Accessories: Provide accessories as scheduled and indicated on Drawings including but not limited to the following.
  • ** NOTE TO SPECIFIER ** Delete accessories not required.
    • 1. Drawers, satin nickel finish.
    • 2. Drawers, antique bronze finish.
    • 3. Doors, satin nickel finish.
    • 4. Doors, antique bronze finish.
    • 5. Tie and belt racks, satin nickel finish.
    • 6. Tie and belt racks, antique bronze finish.
    • 7. Shoe shelves, satin nickel finish.
    • 8. Shoe shelves, antique bronze finish.
    • 9. Show cubbies, satin nickel finish.
    • 10. Show cubbies, antique bronze finish.
    • 11. Valet rod, satin nickel finish.
    • 12. Valet rod, antique bronze finish.
    • 13. Base and crown molding.
    • 14. Jewelry drawers.
    • ** NOTE TO SPECIFIER ** Rubbermaid(R) Garage Organization Solutions combine a unique rail-mounted system with modular storage units that can be customized and reconfigured to meet any storage need. Refer to manufacturer literature. Delete if not required.

2.5 GARAGE ORGANIZATION SYSTEM

  • A. Components:
    • 1. Panel: 3/4 inch (19 mm) thick furniture grade particleboard with a density of 45 pounds per cubic foot (721 kg/cu. m), covered with thermo-fused melamine.
    • 2. Fabrication: Composite panel product composed of resin and wood fibers of varying percents (dependent on properties and thickness) pressed into panels of various sizes.
    • 3. Finish: All visible edges are covered with 2 mm (.078 inch) PVC edge banding.
    • ** NOTE TO SPECIFIER ** Refer to manufacturer's literature for options.
      • a. Color: Black.
    • 4. Partition Sizes:
    • ** NOTE TO SPECIFIER ** Delete partition height not required.
      • a. Height: 30 inches (762 mm).
      • b. Height: 84 inches (2134 mm).
      • ** NOTE TO SPECIFIER ** Delete partition depth not required.
      • c. Depth: 14 inches (356 mm).
      • d. Depth: 19 inches (483 mm).
    • 5. Shelf Sizes:
      • a. Width: 30 inches (762 mm).
      • . ** NOTE TO SPECIFIER ** Delete shelf depth not required.
      • b. Depth: 14 inches (356 mm).
      • c. Depth: 19 inches (483 mm).
  • B. Hardware Requirements: Provide mounting hardware to achieve designed loading capability.
    • 1. Mounting Hardware:
      • a. Components provided for installation to walls with concealed structural members.
      • b. Mounting hardware options as indicated on Drawings; wall mount.
    • 2. Material: All steel European hardware system.
  • C. Mounting Hardware: Provide mounting rail, mounting fasteners, shelf hardware, full extension drawer glides, hanging rod assembly for a complete installation of the shelving system.
  • D. Accessories: Provide accessories as scheduled and indicated on Drawings including but not limited to drawers, doors and FastTrack garage accessories.

PART 3 EXECUTION

3.1 EXAMINATION

  • A. Do not begin installation until substrates have been properly prepared.
  • B. If substrate preparation is the responsibility of another installer, notify Architect of unsatisfactory preparation before proceeding.

3.2 PREPARATION

  • A. Clean surfaces thoroughly prior to installation.
  • B. Prepare surfaces using the methods recommended by the manufacturer for achieving the best result for the substrate under the project conditions.

3.3 INSTALLATION

  • A. Install in accordance with manufacturer's instructions.
  • ** NOTE TO SPECIFIER ** Ventilated wire shelving. Delete if not required.
  • B. Install shelving system and accessories after finishing operations, including painting have been completed. Install system to comply with final layout drawings, in strict compliance with manufacturers printed instructions. Position units level, plumb; at proper location relative to adjoining units and related work. Adjust accessories to provide visually acceptable installation.
    • 1. Use an All-Purpose Clamp (one at least every 4 ft (1219 mm) to secure shelf to back wall. All-Purpose Clamps install into studs located along the back wall at desired shelf height.
    • 2. Open end shelf installations require one support brace 1 inch (25 mm) from open end of shelf.
    • 3. Back clips are to be placed at a maximum distance of 12 inches (305 mm) along back wall for all applications.
    • 4. Shelf-over-shelf or stacked shelf system must be 13 inches (330 mm) apart to allow room for Support Braces.
    • ** NOTE TO SPECIFIER ** Closet and wardrobe system. Delete if not required.
  • C. Install shelving system and accessories after finishing operations, including painting have been completed. Install system to comply with final layout drawings, in strict compliance with manufacturers printed instructions. Position units level, plumb; at proper location relative to adjoining units and related work. Adjust accessories to provide visually acceptable installation.
    • 1. Shelf weight designed capacities based on the Composite Panel Association Technical Bulletin for particleboard shelving Engineering Design Guide Maximum Shelf span table.

3.4 PROTECTION

  • A. Protect installed products until completion of project.
  • B. Touch-up, repair or replace damaged products before Substantial Completion.

END OF SECTION

© 2018 Newell Brands

Rubbermaid Closet and Garage is a division of Rubbermaid Commercial. This site is dedicated to Rubbermaid Professional Customers.